Approx 10yr old Martin Moore Style Kitchen, Island, Granite Worktops and Appliances
This kitchen needs to come out by 8th Feb from Hampshire.
The drawers and island are solid Oak.
Larder/Utility Area
BASE UNITS
1 x 175 small cupboard (1 x shelf)
2 x 450 undersink cupboards (1 x shelf)
WALL UNITS
1 x open wall shelves (with T&G back)
Frame 810, 2 x shelves 335 high
TALL UNITS
All 2210 high
2 x 500 wide frame larder cupboards with 455 doors (4 x shelves). Top cupboard with separate door
1 x 600 freezer housing (605 door/670 frame) with 1 x cupboard above
MAIN KITCHEN
BASE UNITS
1 x 600 oven housing
1 x 400 cupboard (full length of cupboard is 860 into corner with 1 x shelf)
1 x 125 tray cupboard
1 x 600 dishwasher housing (Miele dishwasher with top cutlery tray)
2 x 450 undersink cupboards – inside In Sink Erator (macerator) & pull out wire sink tidy
1 x 380 pull out bin
1 x 370 cupboard (1 x shelf)
1 x 370 drawer above
1 x 400 cupboard (full length of cupboard is 860 into corner with 1 x shelf) No drawer above
1 x 450 cupboard (1 shelf)
WALL UNITS
2 x 400 glazed cupboards (2 x painted shelves)
1 x 270 cupboard (full length of cupboard is 610 into corner with 2 x shelves)
2 x 345 cupboards (2 shelves)
2 x 400 glazed cupboards (2 x painted shelves)
1 x 345 cupboard (2 shelves)
TALL UNIT
Standalone larder cupboard (excluding cornice) 1340 x 585 x 2210 high containing the following:
1 x 600 microwave cubby hole with open back (interior 490 high x 530 deep), cupboard below and galvanised metal grilled cupboard above
1 x 600 fridge housing with galvanised metal grilled cupboard above
ISLAND/TABLE
1440 x 950 (base dimensions)
2 x 395 drawers
2 x 845 pan drawers
1 x 845 drawer
2 x 400 cupboards (1 shelf)
RUN LENGTHS
1. 1740
2. 4160
3. Full run on Aga Wall from end to end ? 2675
4. LHS Aga ? 1120
5. RHS Aga- 560
6. Larder/utility 2500
7. Larder/utility 1740
WORKTOPS
Larder/utility top (wood block ? iroko?) ? 1740 x 625 & 535 x 190
Island top ? (green/black granite) 1000 x 1500
RUNS
Kitchen runs per piece (green/black granite):
1110 x 625
1400 x 615
Sink piece 2050 x 705 (with sink/tap cutouts, draining board grooves & 90mm return at 1200 along length as sink unit projects out further than the rest of the run)
1110 x 660 (Ceramic hob cutout 520 x 285 and back corner cut out for utilities boxing)
560 x 660
APPLIANCES (Aga not included)
Elica extractor fan 1510 x 500
Contains Elica extractor fan (I believe this is a vented extractor as there is an exterior wall vent)
Miele fridge
Miele freezer
In Sink Erator (macerator)
Miele dishwasher with top cutlery tray
Smeg single oven/grill
Neff ceramic 2 ring hob